Search for: All Products
-
CE6917SI
dxDxB: 85 mmx120 mmx18 mm -
CE7322ZR
dxDxB: 110 mmx240 mmx50 mm -
CE7418SI
dxDxB: 90 mmx225 mmx54 mm -
CE1220SI
dxDxB: 100 mmx180 mmx34 mm -
SF6905ZZ
dxDxB: 25 mmx42 mmx9 mm -
S316-RLS9
dxDxB: 1.125"x2.5"x0.625" -
S304-RLS9
dxDxB: 1.125"x2.5"x0.625" -
6306-2RS-C2-P5
dxDxB: 30 mmx72 mmx19 mmThe both side sealed precision deep groove ball bearing 6306 2RS C2 P5 with reduced internal clearance and high production accuracy is suitable for an accurate run. The main dimensions correspond to DIN 625-1 (DIN = German industrial norm). -
C-63801-2RS-TN
dxDxB: 12 mmx21 mmx7 mmThe hybrid deep groove ball bearing C-63801-2RS-TN has excellent properties due to the ceramic rolling elements. It is the wider version of the 68 series. It is particularly suitable for achieving a good load capacity in extremely limited space conditions. Main dimensions according to DIN 625-1. -
SS-699-DRY
dxDxB: 9 mmx20 mmx6 mmFor use in special conditions. The stainless steel miniature ball bearing SS-699 is small and suitable for installation with limited space and on thin shafts. It can withstand very high speeds and is resistant to corrosion. Main dimensions according to DIN 625-1. -
NKIA5903
dxDxB: 17 mmx30 mmxThe combined needle roller bearing NKIA5903 combines the benefits of a radial needle roller bearing with those of a radial angular contact ball bearing and carries radial loads and axial loads in one direction. It is equipped with an inner ring and needs just a small radial installation space. The main dimensions correspond to DIN 5 429-2 (DIN = German industrial norm). -
NKI50/35
dxDxB: 50 mmx68 mmxThe needle bearing NKI50/35 has thin cylinders as rolling elements and can absorb very high radial forces with its massive bearing rings. It is suitable for space-saving installation.$ 16.74 -
NUTR4090
dxDxB: 40 mmx90 mmxThe full complement roller set yoke type track roller NUTR4090 can support very high radial and axial loads due to the double row design. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.$ 38.12 -
TSF10.1C
dxDxB: 10 mmx28 mmx14 mmThe rod end TSF10.1C without seals has a sliding contact surface combination hard chrome/PTFE that is particularly suitable for loads where low friction is needed. It has an internal thread. The main dimensions correspond to DIN 648 (DIN = German industrial norm).$ 5.83 -
W-BA-26-52-8
dxDxB: 26 mmx52 mmx8 mmThe shaft seal W-BA-26-52-8 reliably seals the shaft and the adjacent construction. The recessed tension spring ensures a tight fit.$ 2.92