Search for: All Products
-
6302-2RS-C3
dxDxB: 15 mmx42 mmx13 mmLoadable, stable and with good spinning characteristics. The deep groove ball bearing 6302-2RS-C3 is a true all-rounder and, due to its balanced properties, it is suitable for a variety of applications. Main dimensions according to DIN 625-1.$ 2.11 -
4200-2RS-TN
dxDxB: 10 mmx30 mmx14 mmDouble row design for higher load capacity. The double row deep groove ball bearing 4200-2RS-TN has a higher load capacity than comparable single row deep groove ball bearings, but is only slightly wider. Main dimensions according to DIN 625-3. -
3806-2RS-TN
dxDxB: 30 mmx42 mmx10 mmDouble row design for higher load capacity. The double-row angular contact ball bearing 3806-2RS-TN is ideal for high combined loads from the radial and axial directions. Main dimensions according to DIN 628-3. -
54210-U
dxDxB: 40 mmx82 mmx47 mmFor forces in the shaft direction. The thrust bearing 54210-U absorbs high loads from both axial directions and can be dismantled. It can compensate for low static misalignment. Main dimensions according to DIN 711. -
UCF202
dxDxB: 15 mmxxThe flange bearing UCF202 is suitable for very high radial loads and for installation in various applications. It is particularly robust with its gray cast iron housing. -
SS-R188-2RS
dxDxB: 6.35 mmx12.7 mmx47.624 mmFor use in special conditions. The stainless steel miniature ball bearing SS-R188-2RS in inch-size is small and suitable for installation with limited space and on thin shafts. It can withstand very high speeds. It is resistant to corrosion. -
2303-TN
dxDxB: 17 mmx47 mmx19 mmWith the swiveling inner ring, the self aligning ball bearing 2303-TN offers excellent alignment error compensation. With the two rings of barrel-shaped rollers, it can absorb high radial forces. Main dimensions according to DIN 630. -
NA2209-2RS
dxDxB: 45 mmx85 mmxThe yoke type track roller NA2209-2RS can support high radial loads. Due to the profiled outer surface of the outer ring, it can compensate minor misalignments and skews.$ 33.78 -
LS1730
dxDxB: 17 mmx30 mmx2.75 mmThe pulley LS1730 can be used as a shaft or housing locating washer.$ 1.83 -
77232A
dxDxB: 307.14 mmx332.86 mmx -
73107L
dxDxB: 14 mmx20 mmx -
SCE348
dxDxB: 2.125"x2.5"x0.5" -
RB2008
dxDxB: 20 mmx36 mmx8 mm -
61821C
dxDxB: 105 mmx130 mmx13 mm -
SS7410
dxDxB: 50 mmx130 mmx31 mm